SANDENIT KF210 is dry building adhesive suitable for fixing ceramic tiles outdoors. SANDENIT KF210 is made of hydraulic binders, mineral fillers and additives. It is easy to prepare with fast and efficient installation. .
Mix the powder with water to needed consistency in approximate relation 3:1 (3 parts of SANDENIT KF210 and 1 part of water), manually or with electric drill (stirer) Allow mixed material to sit undisturbed for 15 min, and remix it finally.
of properly prepared adhesive is 2 h with stirring at times.
Surface need to be clean, solid and dry.
Apply SANDENIT KF210 on wall and floor surfaces with metal square-notch trowel. Press tiles into adhesive and smoothly fix them. Position of tiles can be changed during 10 minutes without changing adhesivity. Wash tiles with water BEFORE the adhesive is hardened, and fill joints with tile grout AFTER the adhesive is dry.
from +10 0C to +25 0C.
2-5 kg /m2.
12 months in original packaging in dry and airy rooms.
Bag 25 kg.
Kasem company limited performs regular tests of its products in certified laboratories. This guide is the product of our knowledge and previous practical experience and it should serve all users as a recommendation for the best results in work. If the weather and other conditions are different from those in our instructions, it is necessary to take our instructions as a general guideline, with no warranty for installation. Kasem company limited assumes no responsibility for any damage caused by improper use or improper product selection, as well as for poorly executed work. It is assumed that the user mastered the techniques of installation and use of various products.
TECHNICAL SHEET can be viewed here..